|
Kingston 1G DDRIII 1066 KVR1066D3S7 Laptop RAM DESCRIPTION:
This document describes ValueRAM's 128M x 64-bit 1GB (1024MB) DDR3-1066 CL7 SDRAM (Synchronous DRAM)memory module, based on eight 128M x 8-bit DDR3-1066 FBGA components. The SPD is programmed to JEDEC standard latency 1066Mhz timing of 7-7-7 at 1.5V. This 204-pin SODIMM uses gold contact fingers and requires +1.5V. FEATURES: - JEDEC standard 1.5V ± 0.075V Power Supply
- VDDQ = 1.5V ± 0.075V
- 533MHz fCK for 1066Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 6,7,8,9
- Posted CAS
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- Programmable CAS Write Latency(CWL) = 7(DDR3-1066)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4
which does not allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe - Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
On Die Termination using ODT pin - Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C
Asynchronous Reset - PCB : Height 1.180" (30.00mm), double sided component
PERFORMANCE: - CL(IDD) 7 cycles
- Row Cycle Time (tRCmin) 50.63ns (min.)
- Refresh to Active/Refresh Command Time (tRFCmin) 110ns
- Row Active Time (tRASmin) 37.5ns (min.)
- Power 1.080 W (operating)
- UL Rating 94 V - 0
- Normal Operating Temperature 0o C to 85o C
- Storage Temperature -55o C to +100o C
Package Includes:
1 x Kingston 1G Laptop RAM Shipping Fee:
First item US$7.50, each additional only US$3.0/pc. For Shipping and wholesale discount inquiry, please contact us
|
